Specifications:
• Fully compliant with one-lane PCI Express specification (PCIe x1 slot)
• Two (2) channels - Two (2) 3.0Gbps SATA II ports (300MB/sec)
• One (1) internal SATA II connector
• One (1) external SATA II (eSATA) connector
• Compliant with Serial ATA 1.0a Rev. 1.1 specification
• Designed to connect your external SATA storage with the highest performance and the redundancy you are looking for
• Supports RAID 0 (Stripping), RAID 1 (Mirroring), RAID 0+1 (Mirroring-Stripping), RAID 5 (Parity) and JBOD (*2)
• Supports SATA Multiplier for RAID 0+1 & RAID 5
• Supports both SATA & SATA II devices
• Supports hard disk drive size at 1 TB or higher
• Supports bus master DMA at 3.0Gbps burst rate
• Supports FIS-based switching with Port Multipliers
• Two (2) header-pin sets on board for LED connections
• Supports high performance Serial ATA devices; such as hard disk drives, CD/DVD-R/RW/Blu-Ray optical drives, and SATA storage enclosures
• Supports Windowsฎ 2000/XP/Server 2003/Vista/Windows 7 (*1)
• Supports Linux (*1)
• Fully Plug-N-Play and Hot-Swap compatible (*3)
• Five (5) years warranty


* Below figure shown with a sample RAID-5 configuration with optional components



(Port Multipliers, Hard Disk Drives, and additional cables are sold seperately)

System Requirements:
• PC with 512MB of RAM and 1.0GHz or faster processor
• One (1) available PCI Express slot
• Windowsฎ 2000/XP/Server 2003/Vista/Windows 7 or Linux (*1)

*1 Supports both 32-bit & 64-bit OSes
*2 RAID-5 configuration requires optional port multipliers setup
*3 Capable to hot-plug/hot-swap with eSATA enclosures/devices


Order Number# IO-PESA111

Package Contents:
• One (1) PCI Express Card
• One (1) low-profile bracket
• Software CD drivers
• User manual