Specifications:
• Fully compliant with one-lane PCI Express specification (PCIe x1 slot)
• Two (2) external Power Over eSATA connectors; which supports any two of,
- Two (2) 3.0Gbps Serial ATA II ports
or
- Two (2) Hi-Speed USB 2.0 ports (*3)
• Power Over eSATA connectors will provide 5V & 12V bus-powered via its connectors (*4)
• Eliminates the requirement for a separate power source with Power Over eSATA connectors , while maintaining compatibility with the existing eSATA connector form factor (*4)
• Enables you to connect up to two (2) SATA or two (2) Hi-Speed USB 2.0 external peripherals (with any combination of two SATA and USB devices)
• Fully Plug-N-Play and Hot-Swap compatible (*5)
• Supports Windows 2000/XP/Server 2003/Vista/Server 2008/Windows 7 (*1)
• Supports Linux (*1)

eSATA Features
• Compliant with Serial ATA 1.0a Rev 1.1 specification
• Supports RAID 0 (Striping), RAID 1 (Mirroring), RAID 5 (Parity) and JBOD (*2)
• Supports bus master DMA at 3.0Gbps burst rate
• Supports high performance Serial ATA devices; such as hard disk drives, SATA enclosures, and other devices

USB Features
• Supports Hi-Speed USB 2.0 interfaces via Power Over eSATA connectors & the internal header-pins (*3)
• Connects internal header-pins to on-board, motherboard or add on-card, USB connectors to enable Power Over eSATA to support Hi-Speed USB 2.0 function (*3)
• USB Specification v.1.0/1.1/2.0 compatible (data transfer rate at 1.5/12/480Mbps)
• Hi-Speed USB 2.0 is fully compatible with original USB system, peripherals and cables
• Ideal connection for digital cameras, scanners, printers, external CD/DVD/Blu-Ray writers, hard disk drives, flash memory drives and etc.

System Requirements:
• PC with 256MB of RAM and 1.0GHz or faster processor
• One (1) available PCI Express slot
• Windowsฎ 2000/XP/Server 2003/Vista/Server 2008/Windows 7 and Linux (*1)

*1 Supports both 32-bit and 64-bit OSes
*2 Supported by SATA devices only
*3 Does not have an actual USB 2.0 host controller chipset; features are enabled via internal header-pins to on-board, motherboard or add on-card, USB connectors to enable Power Over eSATA to support Hi-Speed USB 2.0 function
*4 Will provide 5V & 12V power to Power Over eSATA supported devices only
*5 Capable to hot-plug/hot-swap with eSATA enclosures/devices






Order Number# IO-PESU220

Package Contents:
• One (1) PCI Express card
• One (1) USB header expansion cable
• CD software drivers
• User manual


Click here to view the above test chart details testing
results & system configurations info