Specifications:
(*This product is an internal USB 3.0 HUB; NOT, a USB 3.0 Host Controller)
• Use one (1) available USB 3.0 port and turn it into four (4) ports for your many USB 3.0 devices!
• USB HUB fits in PCI/PCI-Express card slot but is not a PCI/PCI-Express card.
• USB Specification v.1.0/1.1/2.0/3.0 compatible (data transfer rate at 1.5/12/480 Mbps/5 Gpbs)
• Four (4) SuperSpeed USB 3.0 downstream ports (in 4-External connectors)
• One (1) SuperSpeed USB 3.0 upstream port
• Auto detect speed and connection of devices
• Built-in with 15-pin SATA power connector for added power source to better support power hungry bus-powered devices (*3)
• USB supports up to 127 devices in peer-to-peer configuration
• SuperSpeed USB 3.0 is fully compatible with original USB systems, peripherals, and cables
• Fully Plug-N-Play compatible
• Supports Windowsฎ XP/Server 2003/Vista/Server 2008/Windows 7/Windows 8 or later/Linux & Mac OS (*1)(*2)

Electrical Specifications:
Power Input: 15-pin SATA power connector
Output Voltage per Port: DC +5V
Output Current per Port: 900mA (max)
Operating Temperature: 0 ~ 40 C

PC Requirements:
• PC with 512MB of RAM and 1.0GHz or faster processor
• One (1) available USB 3.0 port
• One (1) available PCI or PCI-Express slot
• Windowsฎ XP/Server 2003/Vista/Server 2008/Windows 7/Windows 8 or later & Linux (*2)

Mac Requirements:
• Power Mac G3/G4/G5/Mac Pro series with Mac OS 10.3.9 or later (*1)
• One (1) available USB port (*1)
• One (1) available PCI or PCI-Express slot (*1)

*1 USB 1.x supports for Mac OS 8.6-9.x, USB 2.0 supports for Mac OS X or higher, current Mac OS 10.x.x does not support USB 3.0 yet; so, you will only run at USB 2.0 speed in Mac OS X or higher now
*2 Supports both 32-bit & 64-bit OSes
*3 Make sure the power is well connected, otherwise you will see "Power Surge on Hub Port" message error and no 5V bus power in USB ports


Order Number# IO-HIU430

UPC Barcode# 652795784315

Package Contents:
• One (1) hub card
• Software drivers CD
• User manual