Specifications:
• Supports SATA I, SATA II, and SATA III (6G) devices
• Supports any type of SATA devices; such as, SSD, DVD, DVD-RAM, DVD-RW, Blu-ray, CD-RW, hard disk drives and etc.
• Supports 2.5" and 3.5" devices/drives
• Compliant with Serial ATA specification Rev. 2.6
• USB Specification v.1.0/1.1/2.0/3.0 compatible (data transfer rate at 1.5/12/480 Mbps/5 Gbps) (*1)
• Compliant with USB 3.0 specification Rev 1.0
• Supports ATA/ATAPI Packet Command Set
• Supports ATA/ATAPI LBA 48 Addressing Mode
• Write-Protect function prevents unexpected data writing to SATA drive (*6)
• On board header-pin for LED light
• Supports 5V & 12V power from PC power supply through 15-pin SATA power connector
• Supports Windowsฎ XP/Server 2003/Vista/Server 2008/Windows 7/Windows 8 (*2)
• Supports Mac OS 10.3.9 or later (*3)
• Supports Linux (*2)

PC Requirements:
• PC with 512MB of RAM and 1.0GHz or faster processor
• One (1) USB port & 15-pin SATA power connector (*1)
• Windowsฎ XP/Server 2003/Vista/Server 2008/Windows 7/Windows 8 (*2)

Mac Requirements:
• Power Mac G3/G4/G5/Mac Pro series with Mac OS 10.3.9 or later (*4)
• One (1) available USB port (*3)(*4)
• One (1) 15-pin SATA power connector (*5)

*1 To meet USB 3.0 transfer speed, high quality USB 3.0 cables and USB 3.0 ports are required
*2 Supports both 32-bit & 64-bit OSes
*3 Current Mac computers only able to support maximum USB 2.0 speed
*4 Optional USB 2.0 or USB 3.0 host controller cards might be required
*5 Older Mac computers might require optional 4-pin Molex to 15-pin SATA power converter
*6 This write protect function would block "high level" write command to the SATA Hard Drive only. If the software bypasses the windows function call and does its own low level write command, then it will pass through, no matter what the setting is.

Installation:
• Insert the SATA connector (front side) into the SATA device
• Attach the SATA power connector
• Attach the USB 3.0 connector
• The other end of the USB 3.0 cable goes to your internal USB port






Product review from Bare Feats that uses our ASU330 with SSDs


http://www.barefeats.com/hard145.html


Order Number# IO-ASU330

UPS Barcode# 652795823304

Package Contents:
• One (1) bridge adapter
• User manual